Why PVC Edge Band Extrusion Machine Glue Pot Temperature Is Critical

SEVENSTARS MACHINERY machines apply the edge banding with glue to a variety of materials, and the glue must be at just the right temperature. The glue won’t be the right consistency if it’s too hot, or too cold, and the edge banding may not stick well or could look terrible. So, maintaining the glue pot at the optimal temperature is the make or break factor to ensure everything goes off without a hitch. 

Why Temperature Is So Important in PVC Edge Band Extrusion Machine Glue Pots

It is very important to keep the glue pots of PVC edge band extruder machine at the right temperature. It’s just that if the temperature is excessive, the glue can begin to burn, causing it to not be as sticky and possibly even produce bad fumes. Conversely, if the temperature is too low, the glue will not get hot enough to melt and properly adhere the edge banding. The temperature control is important to maintain the temperature and it is something that we make sure to focus on so that the machine is happy to work, otherwise it starts to have such kind of issues, says SEVENSTARS MACHINERY. 

The Effect That Glue Pot Temperature Variation Can Have on Edge Banding Quality

Edge banding can get ruined if your glue pot is fluctuating in temperature the whole time. If the glue is not always the correct temp, then the edge banding won’t be able to stick well, so you want to keep the glue consistently the correct temp. It would sometimes become peeled or bubbled off, and that does not look good. That’s why, at SEVENSTARS MACHINERY, our machines are engineered to maintain precise glue temperature meaning excellent edge banding results, every time. 

The Effects of Temperature Control on The Performance of A PVC Edge Band Extrusion Machine

Temperature control is very important for the PVC edge band PVC extruder machine. When the temperature is right, the machine runs smoothly and the edge bands are perfect. But if that temperature isn’t managed properly, it can cause a lot of problems and slow down the entire process. SEVENSTARS MACHINERY understands these needs and it’s why they craft their machines with state-of-the-art temperature control features so that you can keep everything rolling as it should be. 

The Influence of Glue Pot Temperature on Edge Banding Quality

Running the glue pot at the right temperature can eliminate defects in edge banding. Cracks, discoloration or weak adhesion can happen if the adhesive isn’t at the perfect temperature. SEVENSTARS MACHINERY sheet extrusion machine are equipped with gearboxes that ensure the monitoring of the glue temperature. Which means they make sure that the edge banding comes out just right, with no defects that would mar the appearance, stability or final perfection of the thing that image, in the last moment, you sold. 

Tips on Glue Pot Temperature to Get Perfect Edges Whilst Edge Banding

How do you keep the glue pot at the right temperature? Make sure to check the temperature settings on the machine, work with quality glue that is compatible with your machine and keep the glue pot clean if you don’t want it to ruin the temperature. SEVENSTARS MACHINERY also advises to check the heating elements from time to time to ensure all heating elements inside the glue pots function well. This means you will never have to compromise on edge banding performance.